Audio-Technica AT-VM95C - Moving Magnet Conical stereo cartridge (PICKUP)

Vinylrekvisita

44900

Klikk og hent i butikk Betal når du henter varen.

Velg butikk

Vennligst velg butikk

Navn

Vennligst oppgi navn

E-Post

Vennligst oppgi gyldig e-postadresse

Telefonnummer

Vennligst oppgi gyldig telefonnummer

Avbryt

Ved å benytte tjenesten aksepterer du våre personvernvilkår.

På lager Sendes vanligvis innen 24 timer

Frakt fra 49,- Gratis frakt på alle ordrer over 1000,-

Beskrivelse

AT-VM95C - Conical stereo cartridge

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 Series High-Value Phono Cartridges - One family, 18 products :

• Six moving magnet VM cartridges in the Series, use the same electromagnetic engine-body featuring six different styli, offering a wide choice of options for every budget and application.

• Six interchangeable replacement styli are perfectly compatible with VM95 Series body (and also with XP Series DJ cartridges).

• Six cartridge sets featuring each of the VM95 Series cartridge pre-mounted on the black version of AT-HS6 headshell for plug and play solution.

Models:

AT-VM95C with conical stylus

The series’ entry model features a 0.6 mil conical stylus and improves on the sonic performance of its predecessors, the AT91 and AT91R, thanks to a new aluminum cantilever and a new coil design offering an increased 4 mV output voltage.

AT-VM95E with elliptical stylus

Successor to the legendary AT95E cartridge, the AT-VM95E offers a higher 4 mV output level and improved dynamic range, frequency response and transient response. The aluminum cantilever and 0.3 x 0.7 mil bonded elliptical stylus further contribute to the cartridge’s sonic refinement.

AT-VM95EN with nude elliptical stylus

The AT-VM95EN is furnished with a 0.3 x 0.7 mil nude elliptical stylus mounted to an aluminum cantilever for enhanced sound reproduction and resolution of fine musical detail.

AT-VM95ML with line contact MicroLinear stylus

The AT-VM95ML features a MicroLinear diamond stylus and aluminum cantilever for even greater fidelity and musical accuracy.

AT-VM95SH with line contact Shibata stylus

The top of the line VM95 Series model comes with a line contact Shibata diamond stylus and aluminum cantilever, to take VM95 Series cartridge performance to the highest level of musical realism, resolution, imaging and dynamic impact.

AT-VM95SP for 78 RPM records

The AT-VM95SP has a 3 mil conical stylus and aluminum cantilever optimized for 78 RPM disc playback.

Plug & Play

All models are available in cartridge/headshell combo kits that include a cartridge pre-mounted to the new Audio-Technica AT-HS6 headshell for easy installation.

Interchangeable Styli

All models have the same body design and removable styli, enabling vinyl enthusiasts to interchange and upgrade any VM95 cartridge with any VM95 stylus type.

Specifications:

Model	AT-VM95C
Type	VM Stereo Dual Magnet
Mounting	1/2” centres
Frequency Response	20 - 20,000 Hz
Channel Separation	18 dB (1 kHz)
Output Channel Balance	2.5 dB (1 kHz)
Output Voltage	4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle	23°
Vertical Tracking Force Range	1.8 - 2.2g (standard 2.0 g)
Stylus Shape	Conical
Stylus Size	0.6 mil
Stylus Construction	Bonded Round Shank
Cantilever	Aluminium Pipe
Coil Impedance	3.3 kΩ (1 kHz)
Coil Inductance	550 mH (1 kHz)
DC Resistance	485 Ω
Static Compliance	17 x 10 – 6 cm / dyne
Dynamic Compliance	6.5 x 10 – 6 cm / dyne (100 Hz)
Wire Used for Coil	T.P. Copper
Recommended Load Impedance	47,000 Ω
Recommended Load Capacitance	100-200 pF
Cartridge Weight	6.1g
Dimensions	17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement Stylus	AT-VMN95C
Accessories Included	Two 11 mm installation screws; Two 8 mm installation screws; Two washers