Audio-Technica AT-VM95E/H Plug & Play - Moving Magnet Elliptical stereo cartridge (PICKUP)


1 190,00 1 19000
Klikk og hent i butikk Betal når du henter varen.
Laster inn
Lagervare Kun 1 på nettlager
Frakt fra 0,- Billigste alternativ gratis

AT-VM95E Elliptical stereo cartridge on AT-HS6BK headshell

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge replaces the legendary AT95E and takes advantage of the developments of the AT95EX introduced in 2015.

The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

  • AT-VM95E mounted on AT-HS6BK headshell
  • The total set weight is 15.5g
  • Assembled and tested in the Audio-Technica Factory in Fukui-Japan
  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response

VM95 Series High-Value Phono Cartridges - One family, 18 products :

• Six moving magnet VM cartridges in the Series, use the same electromagnetic engine-body featuring six different styli, offering a wide choice of options for every budget and application.

• Six interchangeable replacement styli are perfectly compatible with VM95 Series body (and also with XP Series DJ cartridges).

• Six cartridge sets featuring each of the VM95 Series cartridge pre-mounted on the black version of AT-HS6 headshell for plug and play solution.


AT-VM95C with conical stylus

The series’ entry model features a 0.6 mil conical stylus and improves on the sonic performance of its predecessors, the AT91 and AT91R, thanks to a new aluminum cantilever and a new coil design offering an increased 4 mV output voltage.

AT-VM95E with elliptical stylus

Successor to the legendary AT95E cartridge, the AT-VM95E offers a higher 4 mV output level and improved dynamic range, frequency response and transient response. The aluminum cantilever and 0.3 x 0.7 mil bonded elliptical stylus further contribute to the cartridge’s sonic refinement.

AT-VM95EN with nude elliptical stylus

The AT-VM95EN is furnished with a 0.3 x 0.7 mil nude elliptical stylus mounted to an aluminum cantilever for enhanced sound reproduction and resolution of fine musical detail.

AT-VM95ML with line contact MicroLinear stylus

The AT-VM95ML features a MicroLinear diamond stylus and aluminum cantilever for even greater fidelity and musical accuracy.

AT-VM95SH with line contact Shibata stylus

The top of the line VM95 Series model comes with a line contact Shibata diamond stylus and aluminum cantilever, to take VM95 Series cartridge performance to the highest level of musical realism, resolution, imaging and dynamic impact.

AT-VM95SP for 78 RPM records

The AT-VM95SP has a 3 mil conical stylus and aluminum cantilever optimized for 78 RPM disc playback.

Plug & Play

All models are available in cartridge/headshell combo kits that include a cartridge pre-mounted to the new Audio-Technica AT-HS6 headshell for easy installation.

Interchangeable Styli

All models have the same body design and removable styli, enabling vinyl enthusiasts to interchange and upgrade any VM95 cartridge with any VM95 stylus type.





VM Stereo Dual Magnet


1/2” centres

Frequency Response

20 - 22,000 Hz

Channel Separation

20 dB (1 kHz)

Output Channel Balance

2.0 dB (1 kHz)

Output Voltage

4.0 mV (@ 1 kHz, 5 cm/sec)

Vertical Tracking Angle


Vertical Tracking Force Range

1.8 - 2.2g (standard 2.0 g)

Stylus Shape


Stylus Size

0.3 x 0.7 mil

Stylus Construction

Bonded Round Shank


Aluminium Pipe

Coil Impedance

3.3 kΩ (1 kHz)

Coil Inductance

550 mH (1 kHz)

DC Resistance

485 Ω

Static Compliance

17 x 10 – 6 cm / dyne

Dynamic Compliance

7 x 10 – 6 cm / dyne (100 Hz)

Wire Used for Coil

T.P. Copper

Recommended Load Impedance

47,000 Ω

Recommended Load Capacitance

100-200 pF


15.5 g


21.2 × 21.4 × 62.4 ( H x W x D mm)

Replacement Stylus


Format LP - STIFTER, PICKUP OG RIAA Artist Vinylrekvisita
Bestillingsnummer 610357 Serie Audio-Technica, Audio-Technica VM95-Serien, Pickup - Moving Magnet