Audio-Technica AT-VM95SH/H Plug & Play - Moving Magnet Shibata stereo cartridge (PICKUP)


2 990,00 2 99000
Klikk og hent i butikk Betal når du henter varen.
Laster inn
Ubekreftet leveringsdato - tom hos leverandør
Frakt fra 0,- Billigste alternativ gratis

AT-VM95SH Shibata stereo cartridge on AT-HS6BK headshell

The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high-end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich, in addition to offering a frequency response up to 25,000 Hz.

  • AT-VM95SH mounted on AT-HS6BK headshell
  • The total set weight is 15.5g
  • Assembled and tested in the Audio-Technica Factory in Fukui-Japan
  • Aluminium cantilever
  • 3.5mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • 20 to 25,000Hz frequency response

VM95 Series High-Value Phono Cartridges - One family, 18 products :

• Six moving magnet VM cartridges in the Series, use the same electromagnetic engine-body featuring six different styli, offering a wide choice of options for every budget and application.

• Six interchangeable replacement styli are perfectly compatible with VM95 Series body (and also with XP Series DJ cartridges).

• Six cartridge sets featuring each of the VM95 Series cartridge pre-mounted on the black version of AT-HS6 headshell for plug and play solution.


AT-VM95C with conical stylus

The series’ entry model features a 0.6 mil conical stylus and improves on the sonic performance of its predecessors, the AT91 and AT91R, thanks to a new aluminum cantilever and a new coil design offering an increased 4 mV output voltage.

AT-VM95E with elliptical stylus

Successor to the legendary AT95E cartridge, the AT-VM95E offers a higher 4 mV output level and improved dynamic range, frequency response and transient response. The aluminum cantilever and 0.3 x 0.7 mil bonded elliptical stylus further contribute to the cartridge’s sonic refinement.

AT-VM95EN with nude elliptical stylus

The AT-VM95EN is furnished with a 0.3 x 0.7 mil nude elliptical stylus mounted to an aluminum cantilever for enhanced sound reproduction and resolution of fine musical detail.

AT-VM95ML with line contact MicroLinear stylus

The AT-VM95ML features a MicroLinear diamond stylus and aluminum cantilever for even greater fidelity and musical accuracy.

AT-VM95SH with line contact Shibata stylus

The top of the line VM95 Series model comes with a line contact Shibata diamond stylus and aluminum cantilever, to take VM95 Series cartridge performance to the highest level of musical realism, resolution, imaging and dynamic impact.

AT-VM95SP for 78 RPM records

The AT-VM95SP has a 3 mil conical stylus and aluminum cantilever optimized for 78 RPM disc playback.

Plug & Play

All models are available in cartridge/headshell combo kits that include a cartridge pre-mounted to the new Audio-Technica AT-HS6 headshell for easy installation.

Interchangeable Styli

All models have the same body design and removable styli, enabling vinyl enthusiasts to interchange and upgrade any VM95 cartridge with any VM95 stylus type.



VM Stereo Dual Magnet


1/2” centres

Frequency Response

20 - 25,000 Hz

Channel Separation

23 dB (1 kHz)

Output Channel Balance

1.5 dB (1 kHz)

Output Voltage

3.5 mV (@ 1 kHz, 5 cm/sec)

Vertical Tracking Angle


Vertical Tracking Force Range

1.8 - 2.2g (standard 2.0 g)

Stylus Shape


Stylus Size

2.7 x 0.26mil

Stylus Construction

Nude Square Shank


Aluminium Pipe

Coil Impedance

3.3 kΩ (1 kHz)

Coil Inductance

550 mH (1 kHz)

DC Resistance

485 Ω

Static Compliance

20 x 10 – 6 cm / dyne

Dynamic Compliance

10 x 10 – 6 cm / dyne (100 Hz)

Wire Used for Coil

T.P. Copper

Recommended Load Impedance

47,000 Ω

Recommended Load Capacitance

100-200 pF


15.5 g


21.2 × 21.4 × 62.4 ( H x W x D mm)

Replacement Stylus


Utgitt 2019 Format LP - STIFTER, PICKUP OG RIAA
Artist Vinylrekvisita Bestillingsnummer 610360
Serie Audio-Technica, Audio-Technica VM95-Serien, Pickup - Moving Magnet